The D-Fend Pro Water Trap is intended for use with the respiratory module while monitoring respiratory parameters. It can be used for both adults and pediatric patients, within a professional healthcare facility in anesthetic environment. The D-Fend Pro water trap is used with side stream sampling and helps to protect the monitor from

The Water Trap D-fend is used in the airway modules of anesthesia devices. The operator should verify that the water trap container is empty and properly attached before connecting to the patient. Before connecting the exhaust line to the sample gas outlet on the compact airway module, ensure the other end is connected to the sample ga

The D-Lite+™ Spirometry Sensor is a specially designed part, for use in CARESCAPE™ respiratory modules, pulse oximeter and other associated GE medical equipment as applicable. The device accurately senses respiratory and ventilator parameters. The sensor is comprised of three ports, one is used for the analysis of lateral flow gases an

GE Healthcare’s gas sampling lines are designed for monitoring CO2, O2, N2O, and anesthetic agents with GE Healthcare side stream respiratory monitoring modules. Sampling lines play a crucial role in ensuring measurement accuracy, preventing nuisance monitoring alarms and maximizing patient safety.

Gas sampling lines are specifi

The Exhalation Valve Replaceable service kit is a specially designed part for use in anesthesia ventilation system and other medical applications as necessary. The exhalation valve assembly has a built-in flow transducer. The assembly consists of exhalation housing, seal exhalation pressure, seal flow transducer, retaining ring, water

The Exhalation Valve Assembly contains a diaphragm, a seal, an exhalation valve housing, expiratory flow sensor, an O-ring, a plunger, a spring and a water trap. It comes under the respiratory module. It vents the respiratory gases from the patient to the atmosphere at the expiration phase. The valve opens after an inspiration is compl

The D-fend Pro+ Water Trap is intended for use in the respiratory module while monitoring respiratory parameters. It can be used for both adults and pediatric patients, within a professional healthcare facility in an anesthetic environment. The D-fend Pro+ water trap is used in side stream airway gas monitoring where sampled gases are

The Pedi-Lite+™ Spirometry Kit is comprised of a 2 meter anesthesia gas sampling line tube, single use Pedi-lite+ sensor and a 2 meter spirometry tube. The tube is compatible for use with D-lite™, D-lite+™ and Pedi-lite+™ spirometry sensors. The kit is suitable for use in CARESCAPE™ respiratory modules, pulse oximeter and other medical

The Pedi-Lite+™ Spirometry Sensor is a specially designed part, for use in CARESCAPE™ respiratory modules, pulse oximeter and other medical equipment as applicable. The device accurately senses respiratory and ventilator parameters. The sensor, when placed at the vicinity of patient's airway provides continuous, reliable and accurate i

Air flow sensor is a device used to monitor the air flow rate of a patient. Flow sensors measure the volume of gas dispensed from the O₂ and air channels during inhalation and exhalation. The relative proportion of gas dispensed from each channel is continuously adjusted to accurately control the percentage of O₂ delivered to the patie